Acetamide, N-[3-(trimethoxysilyl)propyl]-
N-[3-(trimethoxysilyl)propyl]acetamide
CAS: 57757-66-1
Molecular Formula: C8H19NO4Si
Acetamide, N-[3-(trimethoxysilyl)propyl]- - Names and Identifiers
| Name | N-[3-(trimethoxysilyl)propyl]acetamide |
| Synonyms | LogP ACETAMIDOPROPYLTRIMETHOXYSILANE (3-ACETAMIDOPROPYL)TRIMETHOXYSILANE N-(3-trimethoxysilylpropyl)Acetamide N-[3-(trimethoxysilyl)propyl]acetamide Acetamide, N-[3-(trimethoxysilyl)propyl]- |
| CAS | 57757-66-1 |
| InChI | InChI=1/C8H19NO4Si/c1-8(10)9-6-5-7-14(11-2,12-3)13-4/h5-7H2,1-4H3,(H,9,10) |
Acetamide, N-[3-(trimethoxysilyl)propyl]- - Physico-chemical Properties
| Molecular Formula | C8H19NO4Si |
| Molar Mass | 221.33 |
| Density | 1.1 |
| Boling Point | 162-5°C/2-3mmHg |
| Flash Point | 126.8°C |
| Vapor Presure | 0.00269mmHg at 25°C |
| Specific Gravity | 1.0736 |
| pKa | 16.50±0.46(Predicted) |
| Sensitive | 7: reacts slowly with moisture/water |
| Refractive Index | 1.441 |
Acetamide, N-[3-(trimethoxysilyl)propyl]- - Risk and Safety
| TSCA | No |
Acetamide, N-[3-(trimethoxysilyl)propyl]- - Introduction
N-[3-(trimethoxysilyl)propyl]acetamide, also known as N-[3-(trimethoxysilyl)propyl]acetamide, is an organosilicon compound. The following are some of the properties, uses, preparation and safety information about the compound:
Nature:
-Appearance: N-[3-(trimethoxysilyl)propyl]acetamide is a colorless to light yellow liquid.
-Molecular formula: C9H21NO4Si
-Molecular weight: about 227.35g/mol
-Solubility: Soluble in ethanol, acetone, chloroform and other organic solvents, insoluble in water.
-Stability: N-[3-(trimethoxysilyl)propyl]acetamide is stable at room temperature.
Use:
-Chemical Additives: N-[3-(trimethoxysilyl)propyl]acetamide is commonly used as a chemical additive for silicone surfactants, thickeners and moisturizers for coatings and adhesives.
-Functional coating: N-[3-(trimethoxysilyl)propyl]acetamide can be used to prepare coating materials with wear-resistant, waterproof and corrosion-resistant functions.
-Environmental protection: N-[3-(trimethoxysilyl)propyl]acetamide can be used in oil treatment, exhaust control and water treatment and other fields to improve the effect of environmental protection.
Preparation Method:
N-[3-(trimethoxysilyl)propyl]acetamide can be prepared by the following reaction steps:
1. The reaction of ethyl 3-aminopropionate with trimethoxychlorosilane under alkaline conditions.
2. The resulting product is reacted with acetyl chloride to produce the acetylated N-[3-(trimethoxysilyl)propyl]acetamide.
3. Finally, the product is purified and dried to obtain the target product.
Safety Information:
- N-[3-(trimethoxysilyl)propyl]acetamide may be irritating to eyes and skin. Pay attention to personal protective equipment, such as gloves and goggles, when in contact.
-If ingested or inhaled, seek medical attention immediately.
- N-[3-(trimethoxysilyl)propyl]acetamide should be stored in a closed container, away from fire and oxidizing agents, and avoid prolonged exposure to the sun.
This information should be used as a reference. Before using N-[3-(trimethoxysilyl)propyl]acetamide, please be sure to consult the relevant safety data sheet and instructions for use of the compound.
Nature:
-Appearance: N-[3-(trimethoxysilyl)propyl]acetamide is a colorless to light yellow liquid.
-Molecular formula: C9H21NO4Si
-Molecular weight: about 227.35g/mol
-Solubility: Soluble in ethanol, acetone, chloroform and other organic solvents, insoluble in water.
-Stability: N-[3-(trimethoxysilyl)propyl]acetamide is stable at room temperature.
Use:
-Chemical Additives: N-[3-(trimethoxysilyl)propyl]acetamide is commonly used as a chemical additive for silicone surfactants, thickeners and moisturizers for coatings and adhesives.
-Functional coating: N-[3-(trimethoxysilyl)propyl]acetamide can be used to prepare coating materials with wear-resistant, waterproof and corrosion-resistant functions.
-Environmental protection: N-[3-(trimethoxysilyl)propyl]acetamide can be used in oil treatment, exhaust control and water treatment and other fields to improve the effect of environmental protection.
Preparation Method:
N-[3-(trimethoxysilyl)propyl]acetamide can be prepared by the following reaction steps:
1. The reaction of ethyl 3-aminopropionate with trimethoxychlorosilane under alkaline conditions.
2. The resulting product is reacted with acetyl chloride to produce the acetylated N-[3-(trimethoxysilyl)propyl]acetamide.
3. Finally, the product is purified and dried to obtain the target product.
Safety Information:
- N-[3-(trimethoxysilyl)propyl]acetamide may be irritating to eyes and skin. Pay attention to personal protective equipment, such as gloves and goggles, when in contact.
-If ingested or inhaled, seek medical attention immediately.
- N-[3-(trimethoxysilyl)propyl]acetamide should be stored in a closed container, away from fire and oxidizing agents, and avoid prolonged exposure to the sun.
This information should be used as a reference. Before using N-[3-(trimethoxysilyl)propyl]acetamide, please be sure to consult the relevant safety data sheet and instructions for use of the compound.
Last Update：2024-04-10 22:29:15
![Acetamide, N-[3-(trimethoxysilyl)propyl]-](http://res.chembk.com/assets/str/2d/5/57/57757-66-1.png)